IFN ANALOGINPUT

• 订货数据

•  

• 产品信息

跳转到

概述

优势

应用

设计

功能

技术规范

尺寸图

更多信息

概述

The IFN ANALOGINPUT (IFN AI) and IFN ANALOGINPUT-DISTANCE (IFN AI-D) are two robust interface nodes for SIPLUS CSM4000:

• For provision of analog measured data for further processing in combination with the CMS X‑Tools software (X‑Tools must be ordered separately, see "Analysis Software" → "CMS X‑Tools")

• The IFN AI has a measuring range of -10 V to +10 V and the IFN AI-D has an extended voltage range of -20 V to +20 V.

• Can be used for high-accuracy, continuous monitoring in harsh environments

优势

• Thanks to the rugged design and IP67 degree of protection, the IFN ANALOGINPUT is suitable for use in rough industrial environments.

• The compact design permits applications in confined areas.

• Easy handling facilitates efficient commissioning and maintenance.

应用

The IFN ANALOGINPUT is a robust interface node for SIPLUS CMS4000, designed for detecting voltages (-10 V to +10 V) in the frequency range from 0 Hz to 40 kHz.

The IFN ANALOGINPUT is used for high-accuracy, continuous monitoring in harsh environments.

设计

The fronts of the IFN AI and IFN AI-D feature:

• LEDs for status display

• Six connections for analog inputs (-10 V to +10 V, -20 V to +20 V)

• Three connections for IEEE1394 bus system

• One connection for power supply

Connection to the higher-level evaluation PC is via an IEEE1394 bus system operating at 400 Mbit/s.

The module can be mounted on an IEC rail or with mounting brackets.

功能

The IFN ANALOGINPUT enables up to six analog signals (-10 V to +10 V) to be recorded.

The maximum sampling frequency is 192 kHz per channel.

技术规范

Article number6AT8000-1BB00-0XA06AT8000-1BB00-2XA0SIPLUS CMS4000 Interface Node AISIPLUS CMS4000 Interface Node AI-DGeneral information  Product type designationIFN AIIFN AI-DProduct descriptionup to six analog input signals can be measured with the IFN AIup to six analog input signals can be measured with the IFN AI-D in the range of ±20 VInstallation type/mounting  Mounting typestandard railMounting accessoriesMounting bracket, can be ordered as optionRequired clearance  ● for side-by-side mounting at the front80 mm● for side-by-side mounting at the top25 mm● for side-by-side mounting at the back25 mmSupply voltage  Design of the power supplystabilizedRated value (DC)24 Vpermissible range, lower limit (DC)18 Vpermissible range, upper limit (DC)32 VReverse polarity protectionYesOvervoltage protectionYes; max. 35 VInput current  from external supply (24 V DC), max.0.2 APower  Active power input, max.4.8 WAnalog inputs  Number of analog inputs6Designation of the analog inputCH1 ... CH6Electrical input frequency, min.0 HzElectrical input frequency, max.96 kHzOvervoltage strength, min.-60 VOvervoltage strength, max.60 VOpen-circuit detectionYesShort-circuit detectionNoInput ranges  ● VoltageYesInput ranges (rated values), voltages  ● At DC, min.-10 V-20 V● At DC, max.10 V20 VInput ranges (rated values), currents  ● with DC0.012 mAAnalog value generation for the inputs  Parameterizable down sampling frequencies4 / 8 / 16 / 24 / 48 / 64 / 96 kHzSampling frequency, max.192 kHzIntegration and conversion time/resolution per channel  ● Resolution with overrange (bit including sign), max.16 bitErrors/accuracies  Relative measuring accuracy for analog input signals, min.-0.5 %Relative measuring accuracy for analog input signals, max.0.5 %Crosstalk attenuation between analog input signals at 1 kHz-90 dBSignal-to-noise ratio for analog input signals-80 dBInterfaces  Number of interfaces3Design of plug-in connectionConnector plug 8-pole (M12)Transmission rate, max.400 Mbit/sProtocols  Bus protocol/transmission protocolIEEE 1394a/bPotential separation  Potential separation analog inputs  ● Potential separation analog inputsYesDegree and class of protection  IP degree of protectionIP67Standards, approvals, certificates  Certificate of suitabilityCECE markYesKC approvalYesChina RoHS complianceYesUse in hazardous areas  ● ATEXYes● IECExYesAmbient conditions  Ambient temperature during operation  ● min.-40 °C● max.65 °CAmbient temperature during storage/transportation  ● Storage, min.-40 °C● Storage, max.85 °C● Transportation, min.-40 °C● Transportation, max.85 °CConnection method  Design of electrical connection for supply voltageMale connector 5-pole (M12)Design of electrical connection at inputConnector plug 5-pole (M12)Design of electrical connection for the PE conductorM4 screw with contact washer● Connectable conductor cross-section for PE terminal2.5 mm²Mechanics/material  Material of housingaluminumDimensions  Width86 mmHeight210 mmDepth87 mmDepth when mounted on DIN rail96 mmWeights  Weight (without packaging)1.23 kg

尺寸图

IFN ANALOGINPUT