广州西门子中国代理商变频器供应商
EMS600产品信息
跳转到概述
概述SIMATIC Power Line BoosterSystem for general data transmission on conductive media. The transmission media can be sliding contact systems (graphite/copper on copper) such as in electric overhead conveyors or flexible cables such as the ones used in crane systems as well as slip ring transmitters.
SIMATIC HMI IRD400The SIMATIC HMI IRD400 (infrared display unit) module is an HMI unit for making status information clearly visible on a 7-segment display from a considerable distance.
It contains 3 x 7-segment displays, signal lamps and an infrared receiver and transmitter. It is controlled via PROFINET.
The SIMATIC HMI IRD400 links a 7-segment display and/or an infrared interface in a PROFINET network in the TIA Portal. The bright 7-segment display – as a new SIMATIC HMI device for specific applications – can display numerical values in a highly legibly manner. The main advantage is therefore readability from very long distances. The integrated IR interface now makes it possible to link bidirectional infrared communication with a range of up to 10 m in SIMATIC applications and into the TIA Portal.
The infrared interface contains both an infrared receiver for remote control and an infrared sender for communication between display units. A compatible remote control (6ES7292-0CA50-0AA0) can also be supplied. 8 digital inputs/outputs and two LEDs are also available on the module.
The configuration is made in the TIA Portal V14 or higher. An GSD file is available to the user for this purpose.
The SIMATIC IRD400 has an internal PROFINET switch and integrates itself seamlessly into a PROFINET network.
The SIMATIC HMI IRD400 was developed to control electric monorail systems – EMS600.
An application is found everywhere that requires good readability and/or infrared communication. As the functions "3x7 segment display" and "Infrared (IR) interface" via PROFINET are an expansion of the SIMATIC product range, the device is offered to all customers as a SIMATIC standard product.
SIMATIC IRD400 is enclosed in a 140 x 116 x 37.5 mm enclosure (installation section 123 x 99 mm).
The IRD400 is connected to the PROFINET PN networks via PROFINET by means of RJ45 connectors.
The device has a 2-port PN switch. 2-pin connection of the external 24 V DC supply voltage. Fan and battery-less operation. Degree of protection IP65 (at the front).
广州西门子中国代理商变频器供应商 广州西门子中国代理商变频器供应商
