哈尔滨西门子PLC模块变频器
单相, 24 V DC/ 2.5 A (SITOP PSU100S)应用高性能标准电源，适用于单相 120/230 V AC 电网，带自动范围切换；通过 Extra Power 提供高过载能力，电流可达额定电流的 1.5 倍（持续 5 s），持续 120% 输出功率，+45℃ 环境温度。
Power supply, type
2.5 A
Order No.
6EP1 332-2BA10
Input
1-phase AC
Rated voltage Uin rated
120/230 V AC
set by means of selector switch
Voltage range
85 ... 132 V/170 ... 264 V
Overvoltage strength
2.3 x Uin rated, 1.3 ms
Mains buffering at Iout rated
> 20 ms at Uin = 93/187 V
Rated line frequency; rated line frequency range
50/60 Hz; 47 ... 63 Hz
Rated current Iin rated
1.1/0.65 A
Making current limitation (+25°C)
< 27 A, typ. 3 ms
I 2 t
< 0.3 A2s
Built-in incoming fuse
T 2 A/250 V (not accessible)
Recommended miniature circuit breaker (IEC 898) in the mains power input
From 3 A, C characteristic
Output
Controlled, isolated DC voltage
Rated voltage Uout rated
24 V DC
Total tolerance
±3 %
Static line smoothing
Approx. 0.1%
Static load smoothing
Approx. 0.5%
Residual ripple
< 150 mVpp (typ. 10 mVpp)
Spikes (bandwidth: 20 MHz)
< 240 mVpp (typ. 50 mVpp)
Adjustment range
22.8 ... 28.0 V
Status indicator
24 V OK = green LED
On/Off behavior
Overshoot of Uout approx. 4%
Startup delay/voltage rise
< 0.1 s at 230 V AC/typ. 50 ms
Rated current Iout rated
Current range
Up to +60°C
0 ... 2.5 A
Derating
0 ... 3 A (up to +45°C)
Dynamic overcurrent on
Power-up on short-circuit
Typ. 7 A for 100 ms
Short-circuit during operation
Typ. 7 A for 200 ms
Parallel switching for enhanced performance
Yes, 2 units
Efficiency
Efficiency at Uout rated,Iout rated
Approx. 85%
Power loss at Uout rated,Iout rated
Approx. 9 W
Closed-loop control
Dyn. mains compensation
(Uin rated ±15%)
Typ. ±0.3% Uout
Dynamic load smoothing
(Iout: 50/100/50 %)
Typ. ±1% Uout
Load step settling time
50 to
Typ. 0.2 ms
100 to 50%
Protection and monitoring
Output overvoltage protection
< 33 V
Current limitation
Typ. 3.2 ... 3.4 A, overload capability 150% Iout rated up to 5 s/min
Short-circuit protection
Constant current characteristic
Sustained short-circuit current rms value
Approx. 5 A
Overload/short-circuit indicator
-
Safety
Primary/secondary isolation
Yes, safety extra low output voltage Uout according to EN 60950-1 and EN 50178
Safety class
Class I
Leakage current
< 3.5 mA (typ. 0.4 mA)
Safety test
Yes; CB scheme
CE marking
Yes
UL/cUL (CSA) approval
cULus-listed (UL 508, CSA C22.2 No. 107.1),
File E197259, cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)
Protection against explosion
ATEX EX II 3G Ex nA II T4; UL 1604 Class I Div. 2 Group A, B, C, D
FM approval
Marine approval
GL
Degree of protection (EN 60529)
IP20
EMC
Emitted interference
EN 55022 Class B
Supply harmonics limitation
Not applicable
Noise immunity
EN 61000-6-2
Operating data
Ambient temperature range
0 ... +60°C with natural convection
Transport and storage temperature range
‑40 ... +85°C
Humidity class
Climate class 3K3 according to EN 60721, no condensation
Mechanics
Connections
Supply input L, N, PE
One screw-type terminal each for 0.5 ... 2.5 mm2 solid/finely stranded
Output +
2 screw-type terminals for 0.5 ... 2.5 mm2
Output -
Dimensions (W x H x D) in mm
32.5 x 125 x 125
Weight, approx.
0.32 kg
Mounting
Can be snapped onto standard mounting rail EN 60715 35x7.5/15
Accessories
6EP1 332-2BA20
订货数据
6EP1332-2BA20
SITOP PSU100S 24 V/2.5 A 稳定电源 输入：120/230 V AC 输出：24 V DC/2.5 A *EX 批准不 可用*
西门子PLC模块授权一级代理商，西门子电线电缆授权代理商，西门子S7-200系列代理商
哈尔滨西门子PLC模块变频器 哈尔滨西门子PLC模块变频器
